www.pc-wetterstation.de

Verfasst: **03 Jun 2015 15:01**

As my German is far worse then my English, I will post this question in English.

These are the sensor names I use:

|soilTempAct&#91;1&#93;|                %curval&#91;13&#93;%|!

|soilTempMax24h&#91;1&#93;|             %maxval&#91;13&#93;%|!
|soilTempMax24hTime&#91;1&#93;|         %ws_date%T%maxtime&#91;13&#93;%|!
|soilTempMaxToday&#91;1&#93;|           %curminmaxhour&#91;2,0,13&#93;%|!
|soilTempMaxTodayTime&#91;1&#93;|       %ws_date%T%maxtimecurday&#91;13&#93;%|!
|soilTempMaxMonth&#91;1&#93;|           %ws_m_maxval&#91;%ws_month%,13&#93;%|!
|soilTempMaxMonthTime&#91;1&#93;|       %ws_m_maxday&#91;%ws_month%,13&#93;%T%ws_m_maxtime&#91;%ws_month%,13&#93;%|!
|soilTempMaxYear&#91;1&#93;|            %ws_m_maxval&#91;0,13&#93;%|!
|soilTempMaxYearTime&#91;1&#93;|        %ws_m_maxday&#91;0,13&#93;%T%ws_m_maxtime&#91;0,13&#93;%|!

|soilTempMin24h&#91;1&#93;|             %minval&#91;13&#93;%|!
|soilTempMin24hTime&#91;1&#93;|         %ws_date%T%mintime&#91;13&#93;%|!
|soilTempMinToday&#91;1&#93;|           %curminmaxhour&#91;1,0,13&#93;%|!
|soilTempMinTodayTime&#91;1&#93;|       %ws_date%T%mintimecurday&#91;13&#93;%|!
|soilTempMinMonth&#91;1&#93;|           %ws_m_minval&#91;%ws_month%,13&#93;%|!
|soilTempMinMonthTime&#91;1&#93;|       %ws_m_minday&#91;%ws_month%,13&#93;%T%ws_m_mintime&#91;%ws_month%,13&#93;%|!
|soilTempMinYear&#91;1&#93;|            %ws_m_minval&#91;0,13&#93;%|!
|soilTempMinYearTime&#91;1&#93;|        %ws_m_minday&#91;0,13&#93;%T%ws_m_mintime&#91;0,13&#93;%|!

These are the values returned, only actual and today values are returned.

Code: Alles auswählen

|soilTempAct&#91;1&#93;|                12.8|!

|soilTempMax24h&#91;1&#93;|             13.3|!
|soilTempMax24hTime&#91;1&#93;|         20150602T19&#58;20|!
|soilTempMaxToday&#91;1&#93;|           12.8|!
|soilTempMaxTodayTime&#91;1&#93;|       20150602T00&#58;00|!
|soilTempMaxMonth&#91;1&#93;|           --|!
|soilTempMaxMonthTime&#91;1&#93;|       --T--|!
|soilTempMaxYear&#91;1&#93;|            --|!
|soilTempMaxYearTime&#91;1&#93;|        --T--|!

|soilTempMin24h&#91;1&#93;|             12.2|!
|soilTempMin24hTime&#91;1&#93;|         20150602T11&#58;25|!
|soilTempMinToday&#91;1&#93;|           12.2|!
|soilTempMinTodayTime&#91;1&#93;|       20150602T11&#58;25|!
|soilTempMinMonth&#91;1&#93;|           --|!
|soilTempMinMonthTime&#91;1&#93;|       --T--|!
|soilTempMinYear&#91;1&#93;|            --|!
|soilTempMinYearTime&#91;1&#93;|        --T--|!

I tried to find a solution in the manual, but I can not find it.

Wim

Verfasst: **03 Jun 2015 17:50**

Hello,
there must be something else wrong, because the variables are OK and I get these values:

soilTempAct[1]| 26,1|! |soilTempMax24h[1]| 36,7|! |soilTempMax24hTime[1]| 03.06.2015T11:40|!
|soilTempMaxToday[1]| 36,7|!
|soilTempMaxTodayTime[1]| 03.06.2015T11:40|!
|soilTempMaxMonth[1]| 36,7|!
|soilTempMaxMonthTime[1]| 03.06.2015T11:40|!
|soilTempMaxYear[1]| 36,7|!
|soilTempMaxYearTime[1]| 03.06.2015T11:40|!
|soilTempMin24h[1]| 12,8|!
|soilTempMin24hTime[1]| 03.06.2015T06:05|!
|soilTempMinToday[1]| 12,8|!
|soilTempMinTodayTime[1]| 03.06.2015T06:05|!
|soilTempMinMonth[1]| 12,2|!
|soilTempMinMonthTime[1]| 02.06.2015T00:45|!
|soilTempMinYear[1]| -10,6|!
|soilTempMinYearTime[1]| 04.02.2015T07:00|!

If you like, you can send me the File and I shall have a look at it.
w.neudeck@web.de
Call it "variables"

Verfasst: **04 Jun 2015 13:05**

@Wim,

select once Year view
and you get filled this variables.

Those variables (ws_m_...) are only updated
when the graphics view is/was Year.

Better use the much newer variables or
verify (compare) with
%ws_getmem_year%

Werner

Verfasst: **04 Jun 2015 13:25**

Werner hat geschrieben:@Wim,

select once Year view
and you get filled this variables.

Those variables (ws_m_...) are only updated
when the graphics view is/was Year.

Better use the much newer variables or
verify (compare) with
%ws_getmem_year%

Werner

select once Year view
I also checked as I thought I forgot to set once the view to year after a total black-out. seems to be the case.

Better use the much newer variables
At the moment it is not clear how to use the variables you are refering, but I will certainly study / try to find what you mention. But the new template release is going public at 15 June. So I can not change anything as I do not know if current users are up to date with their WSWIN release.

The new release looks promising http://weather-template.nl/weather27/in ... g=en&wp=WS
The WSWIN program also scores high on the comparison page at: http://leuven-template.eu/dokuwiki27/do ... d=en:facts
Wim

Verfasst: **04 Jun 2015 19:43**

@Wim

for example:
%ws_m_maxval[%ws_month%,13]%|!
use
%maxval_mpast[13~%ws_month2%~%ws_year%]%
or %maxval_mpast[13~%ws_month2%~0000]%

Werner

www.pc-wetterstation.de

soil sensor tags return -- values

soil sensor tags return -- values